Water Separators 20-800 Series

Tsunami

$0.00
(No reviews yet) Write a Review
SKU:
Water Seperator Series
REL:112:
21999-0390;1|21999-0390-ED;1|21999-0390-MM;1
REL:129:
21999-0846;1|21999-0227;1|21999-0228;1|21999-1098;2|21999-1098;1|21999-1121;1|21999-1005;1|21999-0846;1|21999-0227;1|21999-0228;1|21999-1098;1|21999-1005;1
REL:113:
21999-0131;1|21999-0390-ED-1;1|21999-0131-MM;1
REL:114:
21999-1034;1|21999-1034-ED;1|21999-1034-MM;1|21999-0082;1|21999-0082-ED;1|21999-0082-MM;1
REL:182:
21999-1150;1|21999-1150-ED;1|21999-1150-MM;1
REL:115:
21999-1096;1|21999-1096-ED;1|21999-1096-MM;1
REL:165:
21999-1160;1|21999-1160-ED;1|21999-1160-MM;1
REL:123:
21999-1120;1|21999-1120-ED;1|21999-1120-MM;1
REL:124:
21999-0960;1|21999-0960-ED;1|21999-0960-MM;1
ACC:152:
1
ACC:153:
21999-0867;1|21999-0144;1|21999-1126;1
BOM:129:
21999-0846;1|21999-0227;1|21999-0228;1|21999-1098;1|21999-1005;1

TSUNAMI WATER SEPARATORS

SIMPLE. EFFICIENT. EFFECTIVE.

The Tsunami Water Separator is a high-quality filtration product that removes dirt, particulate, and water from compressed air systems. The Tsunami Water Separator uses a unique up-flow gravity separation process to remove water droplets and aerosols from the air before being discharged through an automatic drain.

 

Features:
  • Machined from 6061 aircraft aluminum
  • Automatic drains
  • Steel mesh element requires minimal servicing
  • Available for systems with a flow rating from 20 to 800 CFM
  • Optional mounting bracket sold separately
  • Made in America
Benefits:
  • Point-of-use protection for air tools and pneumatic equipment
  • Removes bulk liquids and water
  • Filters particulate down to 10 micron at 99% efficiency
  • Filters particulate down to 1 micron at 95% efficiency

 

DRAIN OPTIONS

Tsunami Water Separators come with one of the following drain options:

Float Drain

Float Drain

STANDARD DRAIN

Contains a float within the device that normally seats on a small orifice. When liquid enters the drain the float rises off its seat, exposing the orifice and allowing liquid to discharge through the stem.

Moisture Minder Filter Drain

Pneumatic Drain

REQUIRES PILOT SIGNAL

A pneumatically actuated drain valve efficiently removes liquids from the filters using an intermittent pilot signal. Water separators, up to 120 CFM, use the filter drain with an internal reservoir (pictured above). Larger units, 225 CFM+, have a head-mounted pneumatic drain valve with an external reservoir.

21999-0177 Electronic Drain Valve w shadow

Electronic Drain

REQUIRES ELECTRICITY

Incorporates a solenoid valve and an electric timer with two on/off settings. ON is the setting for the amount of time the valve needs to stay open (0.5 to 10 seconds) and OFF is the time between openings (0.5 to 45 minutes).

 

 

 

NOT A PURCHASIBLE ITEM

(Product Over Veiw Page)